Checkline TI-MVX Ultrasonic Thickness Gauge with Enhanced Display (Probe Sold Separately)
Price: $ 2,285.00
Enhanced graphic scope Displays A Scan & B Scan for a cross section view
Range: 0.025 - 9.999 inches - 0.63 - 254.0 mm
Resolution:.001" (0.01 mm) Datalogging: YES
The TI-MVX Ultrasonic Thickness Gauge with Enhanced Display offers a series of advanced features including A-Scan, B-Scan as well as a complete alphanumeric datalogging system with storage capacity of thousands of data values and A-scan captures.
The TI-MVX TI-MVX Ultrasonic Thickness Gauge with Enhanced Display features the highest resolution graphic LCD on the market and is especially engineered for optimal ease of use. The TI-MVX Ultrasonic Thickness Gauge with Enhanced Display is supplied as a complete kit with all accessories in carrying case with FREE software, transfer cable and NIST-Traceable Calibration Certificate.
The MVX is equipped with multiple viewing options to provide users with a complete set of inspection tools: (RF waveform, +/- Rectified waveform, Time based B-Scan, and Large Digits).
The A-Scan rectified mode is commonly used for detecting flaws/pits in pulse-echo mode and measuring through paint and coatings in echo-echo mode.
The time-based B-Scan feature of the MVX displays a cross section of the test material. It is commonly used to display the profile of the bottom surface of the test material.
Built in hardware AGC gain control for through paint measurements in multi mode operation.
The MVX has the ability to store 64 custom user defined setups. All factory setups can be selected, edited and saved to any setup location.
Use the visual alarm to set hi and lo limits for applications requiring specific tolerances. If the actual thickness value is above or below the limits, a red light is illuminated.
Use the find feature to locate the detection point, while automatically adjusting the display to bring the signal into view.
MVX also comes complete with our Windows PC software for transferring data to and from a PC.
Includes Flaw Inspection - Prove Up Mode, (special probe required)
The high speed scan feature speeds up the inspection process by making 32 measurements per second. Remove transducer from the tesst material, and display the minimum measurement scanned.
Includes NIST Calibration Certificate
Range in Steel*
Pulse-Echo Mode: Pit and Flaw detection measures from 0.63 to 254 millimeters (0.025 - 9.999inches) Echo-Echo Mode: Thru Paint & coatings measures from 2.54 to 102 mm (0.1 - 4.0 inches). Range will vary +/- depending on the thickness of the coating. *Range varies by transducer, multiple transducers are required to cover entire range
.001 inches (0.01mm)
.0492 to .3936 in./ms 1250 to 9999 meters/sec
English & Metric
Pulse-Echo (flaws, pits) Echo-Echo (thru-paint)
Dual Element (1 to 10 MHz).
16 megabit non-volatile ram
12,000 pages with 1 reading and waveform per page
Three 1.5V alkaline or 1.2V NiCad AA cells
Typically operates for 150 hours on alkaline and 100 hours on NiCad
Auto Power off
if idle 5 min
1/8 in. VGA grayscale display 62 x 45.7mm
Membrane switch with twelve tactile keys
Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
-14 to 140F (-10 to 60C)
63.5 W x 165 H x 31.5 D mm
2 year limited
CE Approved, Factory calibration traceable to national standards
The TI-MVX Ultrasonic Thickness Gauge with Enhanced Display is supplied as a complete kit with the gauge, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, data transfer software, serial output cable and Operating Instruction Manual - all in a foam-fitted carrying case.