|
|
ElektroPhysik 85-804-0600 MiniTest 420 Ultrasonic Thickness Gauge Complete kit including 5 Mhz probe - TRA/005420
Price: $ 1,545.00
Uses Pulse-Echo Principle of Ultrasonics
Basic Ultrasonic Thickness Gauge with adjustable calibration for a wide range of materials
Several Transducers are optionally available including one for High Temperature materials (350 C)
Automatic identification of probes
The ElektroPhysik MiniTest 420 Ultrasonic Wall Thickness Gauge is a basic straight forward ultrasonic thickness testing gauge for simple quick measurements. The MiniTest 420 incorporates a calibration block for zero adjustments and quick calibration. Sturdy and accurate ultrasonic thickness gauge based on the ultrasonic pulse run-time method. 6 ultrasonic probes with frequencies ranging between 2 and 10 MHz in different designs offer a broad spectrum of applications and thickness measurements ranging from 0.65 mm to 500 mm. A high temperature ultrasonic probe is also available, designed for measurement of hot materials with temperatures of up to 350 C. Uninterrupted scanning of a part for thinning is possible at the minimum mode.
Features
- Includes Factory "Works" Calibration Certificate.
- NIST Traceable Calibration Certificate optionally available at additional cost
- Suitable for measurement of various materials including steel, stainless steel, aluminum, glass, plastics (PS/PE)
- Adjustable units inch/mm
- Resolution of 0.001" (0.01 mm)
- Automatic identification of probes
- Uses Pulse-Echo Principle of Ultrasonics
- Sensitivity can be set to "Auto" or "Manual"
- Several Transducers are optionally available including one for High Temperature materials (350 C)
- Warranty 1-Year
- Made in Germany
Specifications
| Measuring Range | Pulse Echo: With standard transducer U5.0: 0.8 - 350 mm (0.03 - 13.8")
(For ranges of other transducers see table) | | Resolution | 0.01mm (0 - 99.9 mm), 0.1(> 100 mm) | | Display | 128 x 64 pixels with backlight | | Velocity Range | 0.0492 to .3937 in/s. 1250 to 10,000 meters/sec | | Probe | Standard transducer U5.0: 8mm (0.31") - (For diameter of other transducers see table) | | Operation Temperature | -20 to 50C (-4 to 122F) | | Battery Type | Two AA batteries | | Battery Life | more than 80 hours under continuous operation | | Weight | approx. 6.70 oz (190 g) | | Size | 5.1 x 2.9 x 0.94" - (130 X 73 X 24 mm) | | Accessories Included | U5.0 5 MHz standard transducer, Operating instructions, two 1.5V AA batteries, Plastic carrying case, Coupling liquid (200 ml), | | Housing Protection | IP40 |
Range
| Type | Diameter | Frequency | Measuring Range | | U5.0 | 8 mm | 0.31" | 5.0 MHz | 0.8 - 350 mm | 0.031 - 13.8" | | U2.0 | 12 mm | 0.47" | 2.0 MHz | 2.0 - 500 mm | 0.079 - 19.7" | | U7.5 | 6 mm | 0.24" | 7.5 MHz | 0.65 - 50 mm | 0.026 - 1.97" | | U10.0 | 4 mm | 0.16" | 10.0 MHz | 0.65 - 20 mm | 0.026 - 0.79" | | U5.0HT | 13 mm | 0.51" | 5.0 MHz | 3.0 - 200 mm | 0.12 - 7.87" |
| Type | Material Temperature | Application | | U5.0 | -12 to 60 C | on flat surfaces or huge curvature radii | | U2.0 | -12 to 60 C | rough surfaces such as cast iron | | U7.5 | -12 to 60 C | thin w all thickness and small curvature radii | | U10.0 | -12 to 60 C | small tube diameters | | U5.0HT | -12 to 350 C | for temperatures up to 350 C |
Downloads
|
|
|
