|
|
Dakota Ultrasonics MX1-DL (MMX-7)High Performance Data Logging Wall Thickness Gauge Z-160-0003 / Z-160-0005 with T-102-2700 Probe
Price: $ 2,350.00
Dakota Ultrasonics MMX-7 High Performance Data Logging Wall Thickness Gauge Z-160-0003 with Enhanced Data Logging with time based B Scan for a cross section view
Resolution:.001" (0.01 mm)
Datalogging:YES
The Dakota Ultrasonics MX1-DL (MMX-7)High Performance Data Logging Wall Thickness Gauge Z-160-0003 / Z-160-0005is a full featured ultrasonic thickness gauge offering an oversized display as well as a complete alphanumeric datalogging system with storage capacity of thousands of data values. The Dakota Ultrasonics MX1-DL (MMX-7)High Performance Data Logging Wall Thickness Gauge Z-160-0003 / Z-160-0005 features the highest resolution graphic LCD on the market and is especially engineered for optimal ease of use.
Kit Contents
- Dakota Ultrasonics MX1-DL (MMX-7)High Performance Data Logging Wall Thickness Gauge Z-160-0003 / Z-160-0005 With T-102-2700 Probe
- 4 oz. bottle of coupling fluid
- 2 AA batteries
| - NIST Traceable Calibration Certificate
- Data Transfer Software
- Serial Output
- Carrying case
- Instruction Manual
|
Features
- The time-based B-Scan feature displays a cross section of the test material. It is commonly used to display the profile of the bottom surface of the test material.
- The MMX-7 also comes complete with our Windows PC software for transferring data to and from a PC.
- Built in hardware AGC gain control for through paint measurements in multi mode operation.
- The high speed scan feature speeds up the inspection process by making 32 measurements per second. Remove transducer from the test material, and display the minimum measurement scanned.
- The MMX-7 has the ability to store 64 custom user defined setups. All factory setups can be selected, edited and saved to any setup location.
- Use the AUTOFIND feature to locate the detection point, while automatically adjusting the display to bring the signal into view.
- CE Certified
- Includes NIST-Traceable Calibration Certificate
- Use the visual alarm to set hi and lo limits for applications requiring specific tolerances. If the actual thickness value is above or below the limits, a red light is illuminated.
- 2 Year Warranty
 Specifications
| Range in Steel | Pulse-Echo Mode:Pit and Flaw detection measures from 0.63 to 254 millimeters (0.025 - 9.999inches)
Echo-Echo Mode:Thru Paint & coatings measures from 2.54 to 102 mm (0.100 - 4.000 inches). Range will vary depending on the thick | | Resolution | .001 inches (0.01mm) | | Velocity Range | .0492 to .3936 in./ms
1250 to 9999 meters/sec | | Units | English & Metric | | Measurement Modes | - Pulse-Echo (flaws, pits)
- Echo-Echo (thru-paint) | | Transducer Types | Dual Element (1 to 10 MHz). | | Memory | 16 megabit non-volatile ram | | Memory capacity | 12,000 pages with 1 reading and waveform per page | | Power Source | Three 1.5V alkaline or 1.2V NiCad AA cells | | Battery Life | Typically operates for 150 hours on alkaline and 100 hours on NiCad | | Auto Power off | if idle 5 min | | Display | 1/8 in. VGA grayscale display 62 x 45.7mm | | Keyboard | Membrane switch with twelve tactile keys | | Case | Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed). | | Operating Temperature | -14 to 140F (-10 to 60C) | | Weight, net | 383 grams | | Dimensions | 63.5 W x 165 H x 31.5 D mm | | Warranty | 2 year limited | | Certification | CE Approved, Factory calibration traceable to national standards |
Related Products
Downloads
|
|
|
