Wall Thickness Gages | Buy Checkline TI-25SX-WOP Ultrasonic Wall Thickness Gauge Complete Kit, without Probe

Checkline TI-25SX General Purpose Ultrasonic Wall Thickness Gauge

Includes NIST-Traceable Calibration Certificate, CE-Certified

5-Year Warranty, Made in USA

Datalogging: NO

Total Measuring Range (depends on material and transducer/probe type)
0.025 - 36.000 inches
0.63 - 914.4 mm

Measuring Range on Steel (with standard T-102-3300 probe)
0.025 - 6.00 inches
0.60 - 150.0 mm

The Checkline TI-25SX allows the operator to select from 8 preset materials as well as program 2 custom material velocities allowing the user to tune the calibration to be optimized for a specific type of material. The calibration can be locked to prevent any accidental adjustments. The preset materials are as follows:

Steel 4340
Stainless 303
Aluminum 2024
Cast Iron
Plexiglass

PVC
Polystyrene
Polyurethane
Custom1
Custom2

line
Kit Contents
line

Checkline TI-25SX General Purpose Ultrasonic Wall Thickness Gauge
Probe
4 oz. bottle of coupling fluid
2 AA batteries
NIST-Traceable Calibration Certificate
Carrying case
Instruction Manual

line
Features
line

Resolution of 0.001 inch (0.01 mm)
The Transducer (probe) is waterproof and can be submerged in shallow water
Special-purpose probes are offered for a variety of applications (1 to 10 MHz)
Switch-selected units for inches or mm
The extruded aluminum housing is impact-resistant and environmentally sealed (IP 65)
to provide trouble-free operation under the toughest field conditions
For underwater surveying, an optional 50 ft (15 meter) underwater probe/cable is available
High visibility LCD Display is readable in all lighting conditions and temps as low as 22 F (-30 C)
LCD shows Thickness Value, Velocity Setting, Stability Indicator, Battery Indicator and units
Acoustic Velocity (calibration) is manually adjusted via the keypad
5 Year Warranty, CE-Certified and Made in USA
Operates on two (2) AA Batteries - 45 hours continuous operation
Selectable Backlight ON/OFF/AUTO
Includes NIST Traceable Calibration Certificate

line
Specifications
line

Total Measuring Range (Steel)	0.025 - 36.000 inches 0.63 - 914.4 mm (depends on material and transducer/probe type)
Measuring Range (Steel)	0.025-6.000 inches 0.60-150.0 mm (with standard transducer T-102-3300)
Resolution	0.004 inch (0.1 mm)
Measuring Mode	Pulse-Echo (P-E)
Velocity Range	0.0120 to .7300 in/s (305 to 18,542 m/sec)
Probe (Standard)	1/4", 5 MHz Dual Element Transducer, actual wearface is 5/8" (17mm), p/n T-102-3300
Probes (optional)	1 to 10 MHz, 3/16" up to 1 inch (custom probes available)
Probe Wearface	PEEK (Polyethylethylkytone)
Cable	1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors
LCD Display	Multi-function 7 segment 4.5 digit liquid crystal display with 0.500" digit height. Two 0.125 in14 segment fields for labels and values, and one 7 segment field for labels and values. Additional icons to indicate features and modes
Display Backlight	Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options
Display Update Rate	10 Hz (10 updates/sec)
Temp. Limits	Ambient: -30 to 75 C (-22 to 167 F) Material: -20 to 100 C (0 to 200 F) High temperature probes available
Battery Type	2x AA batteries (rechargeable batteries can be used)
Battery Life	45 hours continuous use
Weight	308 grams (11 ounces)
Dimensions	63.5 x 131.3 x 31.5 mm (2.5" x 5.17" x 1.25")
Accessories	Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case.
Housing	Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed)
Housing Rating	IP65
Certifications	NIST Traceable and MIL-STD-45662A
Keypad	Sealed membrane that is resistant to both water and petroleum products Seven or eight tactile-feedback keys
Pulse Repetition Frequency (PRF)	200 Hz (200 pulses/sec)
Warranty	Gauge: 5 Years Probes: 90 Days

line
Measuring Limits
line

	Minimum Radius for Convex Surfaces	0.350" (8.89 mm)
	Minimum Radius for Concave Surfaces	3" (76.2 mm)
	Minimum Headroom	1" (25.0 mm)
	Minimum Sample Diameter	0.150" (3.8 mm)
	Minimum Substrate Thickness - F	na
	Minimum Substrate Thickness - NFe	na

line
Related Products
line

TI-25-UW-50
50 Foot Underwater Probe / Cable Assembly

50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors

line

V-Block
Ultrasonic Transducer Holder

line
Downloads
line

Checkline TI-25SX General Purpose Ultrasonic Wall Thickness Gauge - Data Sheet

Checkline TI-25SX General Purpose Ultrasonic Wall Thickness Gauge - Instruction Manual