Dakota X-000-0010 - 3" & 6" Steel Calibration Bars
Productos Similares a Considerar
Calibration blocks are available as a set or individually, allowing users to select the most appropriate thickness for their application
Dakota NDT offer a comprehensive range of Calibration Blocks to suit a wide range of applications and standards
The Dakota Calibration Blocks is available as a set or individually, allowing users to select the most appropriate thickness for their application. Dakota NDT calibration standards are manufactured from 4340 steel to a tolerance of 1% of the nominal thickness and are supplied complete with calibration certificates.
Selecting the right calibration block
Selecting the correct calibration block for your application is essential to ensure accurate evaluation. The form, shape and material of the calibration block should be appropriate for the material being inspected. Any artificially induced flaw should closely resemble that of the actual flaw being tested for.
Specifications
| Model | Descption | ZX | MX | CMX | PZX | PMX | R9 | FX70 | BT |
| X-000-0001 | 4340 Steel Calibration Block 5 Step - .100 to .500 |  | | | | | | | |
| X-000-0002 | 4340 Steel Calibration Block 4 Step - .250 to 1.0 | | | | | | | | |
| X-000-0022 | 1018 Steel Calibration Block 5 Step 2.5 12.5mm | | | | | | | | |
| X-000-0021 | 1018 Steel Calibration Block 4 Step 6.25 25.0mm | | | | | | | | |
| X-000-0010 | 3 & 6 Steel Calibration Bars | | |||||||
| X-000-0011 | 3 Steel Calibration Bar | | |||||||
| X-000-0020 | Glass Calibration block (1", 2" , & 3") | |
Related Products
- Ultrasonic Thickness Gauges are measuring instruments for the non-destructive investigation of a material's thickness using ultrasonic waves. Ultrasonic Thickness Gages accurately measure wall thickness and corrosion of all metals, including steel and aluminum, plastic, ceramics and others
- Ultrasonic Bolt Tension Monitors (Extensometers) measure the elongation produced by tightening a threaded fastener. Our line of monitors can measure the elongation very accurately in fasteners of virtually any material from 1/2 inch to 4 feet in length.
Bolt Tension Meter and Monitors
- Ultrasonic Bolt Tension Monitors (Extensometers) measure the elongation produced by tightening a threaded fastener. Our line of monitors can measure the elongation very accurately in fasteners of virtually any material from 1/2 inch to 4 feet in length.
