ElektroPhysik 80-177-0300 FH7200 Magnetic Wall Thickness Gauge for Thin Walls of Bottles, Tubes, Plates - Probe Sold Separately



Price: $ 4,700.00

ElektroPhysik FH Series MiniTest 7200 and 7400 FH Magnetic Wall Thickness Gauge
Range: 0.00 - 10.00mm
Datalogging:YES
Probe Sold Separately

Choice of two (2) Models:

  • FH-7200- Basic Model
  • FH-7400- Enhanced display and statistics

Choice of Five (5) Probes:

  • FH4: 0 - 6 mm (0 - 0.236")
  • FH4-1MM: 0 - 6 mm (0 - 0.236")
  • FH4-M: 0 - 9 mm (0 - 0.354")
  • FH10: 0 - 13 mm (0 - 0.512")
  • FH10-M: 0 - 24 mm (0 - 0.945")

The ElektroPhysik FH Series MiniTest 7200 and 7400 FH Magnetic Wall Thickness Gauge is a portable thickness measuring device that offers the capability to precisely measure materials up to 10 mm thick. The small size and portability of the device enables it to be operated in production areas and quality laboratories. The FH Series provides easy, non-destructive and highly accurate thickness measurement on all types of non-ferrous products, regardless of their size, shape, and material.

It is ideal for applications where accurate measurement of sharp corners, small radii and/or complex shapes are required.

Two Models

ModelFH-7200offers measurement capabilities including real-time thickness measurement, display of minimum and maximum readings, an offset mode, and automatic storage of up to 100,000 values.

ModelFH-7400offers the same capabilities as the MiniTest 7200 FH plus statistical graphing, real time trend, data base with up to 200 batches and increased automatic storage of up to 240,000 values. e.g. 1200 per batch.

5 Probes to Choose From
In order to maximize the accuracy of readings, five (5) easily interchangeable probes with a hardened probe tip and a variety of ball sizes are available to cover thickness ranges from 0 - 6mm up to 0 - 24. Refer to table below for detailed description of the various measuring ranges, ball diameters and ball type (non-magnetic and magnetic). Use of magnetic balls allow for measurement of thicker materials as both the probe and the ball have their own individual magnetic attraction properties.


line
Kit Contents
line

  • ElektroPhysik FH Series MiniTest 7200 or 7400 FH Magnetic Wall Thickness Gauge
  • Multi-language Operating Instructions
  • Four (4) AA batteries
  • Protective Rubber Shell with stand and belt clip, and MSoft7 Pro
  • Software on USB stick all supplied in a
  • Foam-fitted hard plastic carrying case

Probes are required for measuring and are sold separately

The following accessories will be supplied based on the Probe Type purchased.

FH4 Probe

  • Magnetic Probe Protection sleeve and end cap
  • Spring loaded probe holder / Table stand
  • Non-Magnetic Balls; 1.5mm (100 pcs), 2.5mm (100 pcs) and 4.0mm (50 pcs)
  • Zero calibration tip for 1.5mm, 2.5mm and 4.0mm balls
  • Calibrations Standards: 0.25mm / 1mm / 3mm

FH4-1MM Probe

  • Magnetic Probe Protection sleeve and end cap
  • Spring loaded probe holder / Table stand
  • Non-Magnetic Balls; 1.0mm (100 pcs), 1.5mm (100 pcs), 2.5mm (100 pcs) and 4.0mm (50 pcs)
  • Zero calibration tip for 1.0mm, 1.5mm, 2.5mm and 4.0mm balls
  • Calibrations Standards: 0.15mm, 0.25mm, 1mm and 3mm

FH4-M Probe

  • Magnetic Probe Protection sleeve and end cap
  • Spring loaded probe holder / Table stand
  • Non-Magnetic Balls; 1.5mm (100 pcs), 2.5mm (100 pcs), 4.0mm (50 pcs)
  • Magnetic Balls; 1.5mm (25 pcs) and 3.0mm (20 pcs)
  • Zero calibration tip for 1.5mm, 2.5mm, 3.0mm and 4.0mm balls
  • Calibrations Standards: 0.25mm, 1mm, 3mm and 8mm

FH10 Probe

  • Magnetic Probe Protection sleeve and end cap
  • Spring loaded probe holder / Table stand
  • Non-Magnetic Balls; 2.5mm (100 pcs), 4.0mm (50 pcs), 6.0mm (25 pcs) and 9.0mm (10 pcs)
  • Zero calibration tip for 2.5mm, 4mm, 6mm and 9mm balls
  • Calibrations Standards: 1mm, 3mm and 8mm

FH10-M Probe

  • Magnetic Probe Protection sleeve and end cap
  • Spring loaded probe holder / Table stand
  • Non-Magnetic Balls; 2.5mm (100 pcs), 4.0mm (50 pcs), 6.0mm (25 pcs)
  • Magnetic Balls; 4.0mm (20 pcs), 6.0mm (20 pcs) and 9.0mm (10 pcs)
  • Zero calibration tip for 2.5mm, 4.0mm, 6.0mm and 9.0mm balls
  • Calibrations Standards: 1mm, 3mm, 8mm and 18mm


line
Features
line

  • Includes Calibration Certificate Traceable to PTB/Dakks
  • Ideal for Bottles, Aluminum Cans, Glass and Plastic Components with Complex Shapes
  • High precision target balls for reproducible measurements
  • Data capture up to 20 data points per second
  • Sensor-integrated digital signal processing
  • Multi-point calibration up to 5 points
  • Large, easy-to-read display
  • Minimum and maximum readings
  • Menu-controlled user interface
  • Context-sensitive on-line help
  • SPC capabilities
  • FH4-1MM is a special probe designed to be used with 1mm diameter balls (and larger) to measure in extremely small cocave areas, gaps and recesses.
  • Certified Calibration Standards Optional (inquire)
  • Warranty 1-Year
  • Made in Germany


line
Specifications
line

Measuring Range withFH4Probe0 - 6 mm (0 - 0.236"), refer toProbe Type Tableabove for additonal details of ball sizes needed for measurement
Measuring Range withFH4-1MMProbe0 - 6 mm (0 - 0.236"), refer toProbe Type Tableabove for additonal details of ball sizes needed for measurement (Includes additional calibration with 1mm diameter non-magnetic balls for use in small concave areas)
Measuring Range withFH4-MProbe0 - 9 mm (0 - 0.345"), refer toProbe Type Tableabove for additonal details of ball sizes needed for measurement
Measuring Range withFH10Probe0 - 13 mm (0 - 0.512"), refer toProbe Type Tableabove for additonal details of ball sizes needed for measurement
Measuring Range withFH10-MProbe0 - 24 mm (0 - 0.945"), refer toProbe Type Tableabove for additonal details of ball sizes needed for measurement
Accuracy withFH4Probes0-1. 5 mm: (3 m + 1% of reading)
0-2. 5 mm: (5 m + 1% of reading)
0-4.0 mm: (10 m + 1% of reading)
Accuracy withFH10Probes0-4.0 mm: (5 m + 1% of reading)
0-7.0 mm: (10 m + 1% of reading)
0-10.0 mm: (20 m + 1% of reading)
0-13.0 mm: (20 m + 1% of reading)
0-16.0 mm (magnetic): (40 m + 2% of reading)
0-24.0 mm (magnetic: (60 m + 2% of reading)
Low Range ResolutionFH4: 0.1 m | FH10: 0.2 m
RepeatabilityBetter than (1 m + 0.5 % of reading)
Measuring PrincipleMagnetostatic
Logging Rate1, 2, 5, 10, 20 readings per second (selectable)
Data MemoryFH7200: 100,000 values | FH7400: 240,000 values
Calibration ModesFactory, Zero, Zero + up to 4 points
Measuring UnitsMetric: m, mm | Imperial mils, inch
Statistical ChartingNumeric, trend, and histogram (with MiniTest 7400 FH only)
InterfacesUSB + IrDA 1.0
Probe Cable Length1 meter (39")
Operating temperature-10 C to +60C (Storage temperature: -20C to +80C)
Dimensions153 mm x 89 mm x 32 mm
Weight310 grams
Power4 x AA batteries, or optional AC adapter
Warranty1-Year
DIN/ISO/ASTM/BSI StandardsConforms to DIN EN ISO 2178, DIN EN ISO 2360, DIN 50982, ASTM B499, ASTM B244 and BS 5411


line
Range
line

Probe TypeOverall Meas. RangeBall Diam.Ball TypeResulting Meas. Range
FH40 - 6 mm
0 - 0.236"
1.5 mm
2.5 mm
4.0 mm
Non-Magnetic
Non-Magnetic
Non-Magnetic
0 - 2.0 mm
0 - 3.5 mm
0 - 6.0 mm
FH4-1MM10 - 6 mm
0 - 0.236"
1.0 mm
1.5 mm
2.5 mm
4.0 mm
Non-Magnetic
Non-Magnetic
Non-Magnetic
Non-Magnetic
0 - 1.3 mm
0 - 2.0 mm
0 - 3.5 mm
0 - 6.0 mm
FH4-M20 - 9 mm
0 - 0.345"
1.5 mm
2.5 mm
4.0 mm
1.5 mm
3.0 mm
Non-Magnetic
Non-Magnetic
Non-Magnetic
Magnetic
Magnetic
0 - 2.0 mm
0 - 3.5 mm
0 - 6.0 mm
0 - 5.0 mm
0 - 9.0 mm
FH100 - 13 mm
0 - 0.512"
2.5 mm
4.0 mm
6.0 mm
9.0 mm
Non-Magnetic
Non-Magnetic
Non-Magnetic
Non-Magnetic
0 - 4.0 mm
0 - 7.0 mm
0 - 10.0 mm
0 - 13.0 mm
FH10-M20 - 24 mm
0 - 0.945"
2.5 mm
4.0 mm
6.0 mm
9.0 mm
4.0 mm
6.0 mm
Non-Magnetic
Non-Magnetic
Non-Magnetic
Non-Magnetic
Magnetic
Magnetic
0 - 4.0 mm
0 - 7.0 mm
0 - 10.0 mm
0 - 13.0 mm
0 - 16.0 mm
0 - 24.0 mm
  1. Includes additional calibration with 1mm diameter balls for use in small concave areas
  2. Use of Magnetic balls allows for extended measuring range

Order Online
Check the items you would like to order then click "Add To Cart". Items typically ship within 1 Week
Product Price
ElektroPhysik 80-177-0300 FH7200 Magnetic Wall Thickness Gauge for Thin Walls of Bottles, Tubes, Plates - Probe Sold Separately $4,700.00
Accessories Price
ElektroPhysik 82-174-0016 FH-BALLS-10, 1.0 mm diameter Non-Magnetic Steel Balls - 100 pieces $50.00
ElektroPhysik 82-174-0004 FH-BALLS-15, 1.5 mm diameter Non-Magnetic Steel Balls - 100 pieces $50.00
ElektroPhysik 82-175-0004 FH-BALLS-25, 2.5 mm diameter Non-Magnetic Steel Balls - 100 pieces $50.00
ElektroPhysik 82-175-0005 FH-BALLS-40, 4.0 mm diameter Non-Magnetic Steel Balls - 50 pieces $55.00
ElektroPhysik 82-175-0006 FH-BALLS-60, 6.0 mm diameter Non-Magnetic Steel Balls - 25 pieces $65.00
ElektroPhysik 82-175-0014 FH-BALLS-90, 9.0 mm diameter Non-Magnetic Steel Balls - 10 pieces $50.00
ElektroPhysik 82-174-0029 FH-BALLS-15M, 1.5 mm diameter Magnetic Steel Balls - 25 pieces $95.00
ElektroPhysik 82-174-0030 FH-BALLS-30M, 3.0 mm diameter Magnetic Steel Balls - 20 pieces $105.00
ElektroPhysik 82-175-0023 FH-BALLS-40M, 4.0 mm diameter Magnetic Steel Balls - 20 pieces $105.00
ElektroPhysik 82-175-0024 FH-BALLS-60M, 6.0 mm diameter Magnetic Steel Balls - 20 pieces $110.00
ElektroPhysik 85-139-0014 IrDA adapter - USB for wireless data transfer $245.00
ElektroPhysik 80-901-1900 Foot switch for FH Series thickness gauge $425.00
ElektroPhysik 80-904-0400 Connection box with USB cable for FH Series and QuintSonic, for use with FootSwitch and IrDA adapter $448.00
ElektroPhysik 80-900-0005 AC-Adapter for FH Series and QuintSonic $120.00
ElektroPhysik 85-199-0001 Replacement Dust protection case for FH / QuintSonic $60.00
ElektroPhysik 80-202-0001 MiniPrint 7000 Printer, Thermal Printer - connects to gauge via Infrared Port $1,105.00
ElektroPhysik 85-159-0006 Cable RS 232C with converter $395.00
ElektroPhysik 80-900-0006 USB Output Cable for FH Series and Quintsonic Thickness Gauges $220.00
ElektroPhysik 80-174-0600 FH4, Magnetic Wall Thickness Probe (0 - 6 mm / 0.236") for use with FH7200 or FH7400 Gauge Body $4,395.00
ElektroPhysik 80-174-0300 FH4-1MM, Magnetic Wall Thickness Probe (0 - 6 mm / 0.236") for use with FH7200 or FH7400 Gauge Body [80-174-0300] $4,600.00
ElektroPhysik 80-174-0500 FH4-M, Magnetic Wall Thickness Probe (0 - 9 mm / 0.354") for use with FH7200 or FH7400 Gauge Body $4,895.00
ElektroPhysik 80-175-0900 FH10 Magnetic Wall Thickness Probe (0 - 13 mm / 0.512") for use with FH7200 or FH7400 Gauge Body (FHS/075010) $4,870.00
ElektroPhysik 80-175-0600 FH10-M, Magnetic Wall Thickness Probe (0 - 24 mm / 0.945") for use with FH7200 or FH7400 Gauge Body $5,340.00

 



 
 

Powered by Marctin Web Architecture