|
|
Checkline TI-007X Precision Ultrasonic Wall Thickness Gauge
Price: $ 2,250.00
Precision Ultrasonic Wall Thickness Gauge for Thin Walls
Resolution: .0001" (0.001 mm)
Includes NIST-Traceable Calibration Certificate, CE-Certified
5-Year Warranty, Made in USA
Datalogging: NO
Range with Standard Delay Line Transducer 0.0060" - 1.000" / 0.150 - 25.40 mm Range with Contact Transducers up to 36.00" / 915.0 mm The Checkline TI-007X is a precision ultrasonic wall thickness gauge designed for high-resolution measurements on thin-wall metal and plastics. It is packaged in a sturdy extruded aluminum housing which is sealed for excellent environmental protection assuring trouble-free use even in the toughest field and production environments. The TI-007X has measuring range in steel from 0.0060 to 1.0000 inch, (0.15 to 25.40 mm). Using a single element delay tip transducer, the gauges will measure thin materials and automatically remove any coatings in Echo-Echo Mode (E-E) as well as automatically switch to Interface Echo Mode (I-E)when measuring thicker materials, For measurement of plastics, the user would select Plastic Mode (PLAS) and use the option Graphite Delay Line Tip (p/n X-633-0000). Additional Measuring Modes include Differential (DIFF) where a user sets a "nominal value" and the gauge displays the difference between then nominal and actual wall thickness, Alarm (user-set Hi/Low Limits) trigger Hi/Lo LED's when the measured values are out of tolerance and Velocity Mode The TI-007X can also be used with single element contact transducers for wall thickness measurements up to 36 inches (923 mm). Although the TI-007X does not have any built-in memory, it can transfer single values (value on the display) via the USB port to a PC or compatible data collector. No Software is required.
Kit Contents
- Checkline TI-007X Precision Ultrasonic Wall Thickness Gauge
- Probe
- 4 oz. bottle of coupling fluid
- USB-C Data transfer cable
- 2 AA batteries
- NIST Traceable Calibration Certificate
- Carrying case
- Instruction Manual
|  |
Features
- Includes NIST Traceable Calibration Certificate
- Resolution of 0.0001 inch (0.001 mm)
- Large, backlit LCD display retains last reading
- Selectable units of inch or mm
- Selectable Backlight ON/OFF/AUTO
- Optional serial RS-232 or Bluetooth output
- IP 65 Rated for protection even in the toughest field conditions
- Operates on two (2) AA Batteries - 45 hours continuous operation
- Powered by: 120MHz FPGA timing & 100 volt spike pulser
- Measure Modes: Pulse-Echo (P-E), Echo-Echo (E-E), Interface Echo (I-E) and Plastics (PLAS)
- Additional Modes Include Differential (from user-entered "nominal value"), Alarm (user-set Hi/Low Limits) and Velocity Mode
- LCD shows Thickness Value, Velocity Setting, Gain Setting, Stability & Battery Indicators, Scan Mode, Zero and units
- Scan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the "scan" will be displayed
- Calibrate to a sample of known thickness which automatically calculates the optimal acoustic velocity
- USB Data output of single values for transfer to data collection devices (no internal memory)
- Adjustable GAIN (AGC) in 5 steps to fine tune the gauge for use on challenging materials or applications
- Can be used with both Single Element Delay Line and contact transducers (5 to 20MHz)
- CE-Certified
- Warranty:Gauge: 5 YearsProbes: 90 Days
- Made in the USA
Specifications
| Total Measuring Range | (Steel) | 0.006 - 36.000 inches | 0.15 - 924 mm | (depends on material and transducer/probe type) | | Range with Standard Probe | 0.0060-1.0000" (0.15-25.40 mm) with standard delay line transducer in steel | | Resolution | 0.0001" (0.001 mm) . 0.001" (0.01 mm), user-selected units and resolution | | Measuring Modes | Pulse-Echo (P-E), Echo-Echo (E-E), Interface Echo (I-E) and Plastics (PLAS), Differential, Alarm, Scan and Velocity (VX) | | Gain | Automatic time dependent gain (TDG) with manual override | | Velocity Range | 0.0120 to .7300 in/s (305 to 18,542 m/sec) | | Probe (Standard) | 1/4" diameter, 15 MHz delay line transducer with cable (p/n T-402-5507) | | Probes (optional) | Various Single Element Delay Line and Contact Transducers (5 to 20MHz) | | Cable | 4 ft. (1.2 m) with Microdot/Lemo00 connector. | | Display | Multi-function 7 segment 4.5 digit liquid crystal display with Back-light | | Display Backlight | Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options | | Display Update Rate | 10 Hz (10 updates/sec) | | Output | USB single value only (no internal memory) TI-007DLXfor a model with build-in memory for 40,000 values USB output | | Output Optional | RS-232 and Bluetooth | | Operating Temperature | -22 to 167F (-30 to 75C) | | Battery Type | 2x AA 1.5V alkaline, 1.2V NiCad, or 1.5V lithium AA cells (rechargeable batteries can be used) | | Battery Life | Typically operates for 35 hours on alkaline and 18 hours on NiCad | | Weight | 11 ounces (308 grams) | | Dimensions | 2.5 x 5.17 x 1.25" | (64 x 131 x 32 mm) | | Housing | Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) | | Housing Protection | IP65 | | Certifications | NIST Traceable and MIL-STD-45662A | | Keypad | Sealed membrane that is resistant to both water and petroleum products
Seven or eight tactile-feedback keys | | Pulse Repetition Frequency (PRF) | 200 Hz (200 pulses/sec) | | To Lock Settings | With gauge powered off, press and hold the "+" key while powering on the gauge | The LOCK icon will be illuminated on the Display | | To unLock Settings | With gauge powered off, press and hold the "-" key while powering on the gauge | The LOCK icon will turn off | | Warranty | Gauge: 5 Years | Probes: 90 Days |
Delay Line Tips for TI-007X
| P/N | Description | Standard / Optional | Image | | X-231-0000 | 1/4" x 3/8" for all metals (Short) | Standard |  | | X-241-0000 | 1/4" x 1/2" for all metals (Long) | Standard |  | | X-633-0000 | 1/4" x 3/8" Graphite Tip for thin plastics (Graphite Short) | OPTIONAL |  |
Related Products
TI-PVX
Precision Ultrasonic A-scan Thickness Gauge - Hardware AGC gain control for multiple echo and thru-paint measurement
- 16 factory setups and 48 user-defined setups. User defined setups can be edited for custom applications
- PVX is equipped with an alpha-numeric data logger to provide increased versatility for those custom reporting needs
|  |
Downloads
|
|
|
