Dakota QCG5010 - 10.00MHz 1/2" Shear Wave - Quick Change Transducers - Standard - High Gain
Similar Products to Consider
The Dakota Shear Wave Quick Change Transducers are single element transducers with a threaded tip allowing angle beam wedges to be changed with minimum delay.
The Dakota Shear Wave Quick Change Transducers can be used when different frequencies are required using the same wedge, or where different angles are required using the same frequency transducer.
These transducers are ideal for inspecting curved surfaces and hard to reach areas.
The Dakota Shear Wave Quick Change Transducers can be fixed to wedges of different angles to produce shear wave measurements.
When used in conjunction with the Trigonometry feature of the gauge, the transducer will produce instrumental flaw detection sound shear waves.
Specifications
| Part Number | Probe Diameter | Probe Characteristic | Damping | FX70 | FX71 |
| 1.00MHz Shear Wave - Quick Change Transducers | |||||
| PQCG251 | 1/4" | Composite | HG |  | |
| PQCG371 | 3/8 | Composite | HG | | |
| PQCG501 | 1/2" | Composite | HG | | |
| PQCR251 | 1/4" | Composite | R | | |
| PQCR371 | 3/8 | Composite | R | | |
| PQCR501 | 1/2" | Composite | R | | |
| 2.25MHz Shear Wave - Quick Change Transducers | |||||
| QCG2525 | 1/4" | Standard | HG | | |
| QCG3725 | 3/8 | Standard | HG | | |
| QCG5025 | 1/2" | Standard | HG | | |
| QCR2525 | 1/4" | Standard | R | | |
| QCR3725 | 3/8 | Standard | R | | |
| QCR5025 | 1/2" | Standard | R | | |
| PQCG2525 | 1/4" | Composite | HG | | |
| PQCG3725 | 3/8 | Composite | HG | | |
| PQCG5025 | 1/2" | Composite | HG | | |
| PQCR2525 | 1/4" | Composite | R | | |
| PQCR3725 | 3/8 | Composite | R | | |
| PQCR5025 | 1/2" | Composite | R | | |
| 3.50MHz Shear Wave - Quick Change Transducers | |||||
| PQC5035 | 1/2" | Composite | S | | |
| 5.00MHz Shear Wave - Quick Change Transducers | |||||
| QCG2550 | 1/4" | Standard | HG | | |
| QCG3750 | 3/8 | Standard | HG | | |
| QCG5050 | 1/2" | Standard | HG | | |
| QCR2550 | 1/4" | Standard | R | | |
| QCR3750 | 3/8 | Standard | R | | |
| QCR5050 | 1/2" | Standard | R | | |
| PQCG2550 | 1/4" | Composite | HG | | |
| PQCG3750 | 3/8 | Composite | HG | | |
| PQCG5050 | 1/2" | Composite | HG | | |
| PQCR2550 | 1/4" | Composite | R | | |
| PQCR3750 | 3/8 | Composite | R | | |
| PQCR5050 | 1/2" | Composite | R | | |
| 10.00MHz Shear Wave - Quick Change Transducers | |||||
| QCG2510 | 1/4" | Standard | HG | | |
| QCG3710 | 3/8 | Standard | HG | | |
| QCG5010 | 1/2" | Standard | HG | | |
| QCR2510 | 1/4" | Standard | R | | |
| QCR3710 | 3/8 | Standard | R | | |
| QCR5010 | 1/2" | Standard | R | | |
| PQCG2510 | 1/4" | Composite | HG | | |
| PQCR2510 | 1/4" | Composite | R | | |
HG- High Gain Damped Transducer
R- Resolution Damped Transducer
S - Standard Undamped Transducer
Related Products
Dakota Ultrasonics FX70-DL (DFX-7) Flaw Detector Complete Kit, Z-220-0003 / Z-220-0005
- There are two versions of the DFX-7 series: DFX-7 and DFX-7+. The DFX-7 is a wide band only gauge, which includes a single wide band filter with a range of 1.8MHz to 19MHz. The DFX-7+ includes the same wide band filter, but also includes a few narrow band filter options at 2MHz, 5MHz and 10MHz. The wide band option is responsive to all signals within the given frequency range.
Dakota Ultrasonics FX71-DL (formerly DFX-7+) Flaw Detector Kit, Z-221-0003 / Z-221-0005
- The Dakota Ultrasonics FX71-DL (DFX-7+) Flaw Detector Complete Kit, Z-221-0003 / Z-221-0005 - Thickness Gauge has the ability to simultaneously measure coatings and material thicknesses while maintaining the ability to locate pits, flaws and defects in the material. Based on the same operating principles as SONAR, the DFX-7 is capable of measuring the thickness of various materials with accuracy as high as 0.001 inches, or 0.01 millimeters.
